This year Breton is showing up in great style at the most important Italian fair for the machinery and instrumental products of the stone marble sector scheduled in Verona, September 27-30.
Our booth, covering more than 1.400mq, will be located in Hall 4.
We will be present with the new PARAGON multi-wire for diamond wires diameter 5.3mm and with ResinDrone, multi-axis robot for automatic resination of marble and granite slabs.
Big news of 2017 is the "Tango" version, with oscillating spindles, of the KFT 5000 Luxmaster polisher.
There's more! There will be the world premiere of our new Hyperock technology, shown in a special exhibition area.
The Breton Paragonrange of multiwire saws for cutting granite blocks has been extended to include a 2100 mm cutting width version that can be configured with up to 78 wires.
In order from the smallest machine, the Paragonrange also includes the 600, 800, 1000 and 1600 models.
PARAGON THE NEW BENCHMARK IN THE MARKET
NOW AVAILABLE ALSO FOR 5.3mm diamond wire
Paragon multi-wire machine with 5.3mm Ø wire
In the picture above, MONDIALGRANIT (counting on 8 operating Breton multi-wire machines) shows its Paragon successfully using the 5,3 mm diamond wire.
Breton enriches its product range with Paragonmachines, specially conceived to work with 5.3mm wire, for either variable or fixed pitch.
5,3 mm wire potential advantages: • more slabs from a single block • less electrical power consumption • less sludge to be removed
Bretonremains
at your disposal to provide you with all necessary information to find
out about cost savings connected to the use of 5.3mm diamond wire.
INCOMPARABLE AND INNOVATIVE
• Triangle geometry with just
five transmissions.
• Diameter of all
transmissions of 1.000mm.
• Adjustable wire driving
drums.
• Easy access to the machine
with practical staircases and gangways.
• Fast and easy wire change
and positioning.
• Immediate and intuitive
touch screen operator interface for machine management.
• Hydraulic tensioner ensuring
a uniform tension among wires.
Mod. PARAGON 600
Mod. PARAGON 800
TRIANGLE CONFIGURATION
DRUMS / PULLEYS
Paragonfive rotating drums, all of which have a diameter of 1.000 mm, guarantee minimum wire fatigue and a very low cooling water consumption. The rigidity of the structure and the isosceles triangular geometry with wires just 20 metres long guarantees lower wire vibrations while cutting, leading to higher cutting quality and longer service life of the rubber profiles.
THE LOAD-BEARING STRUCTURE
The drums and pulleys are installed inside a rigid, boxed steel structure, which runs along the load-bearing columns, stiffly anchored to the ground and stabilized with steel tie rods that ensure a next-to-nothing deformation for the cutting purpose. Column deformation while cutting has been checked using finite element mathematical calculations.
MAXIMUM ERGONOMICS
WIRE STRETCHING PULLEYS AND WIRE INSTALLATION Wire stretching pulleys, one for each wire, rotate on bearings and are individually driven by a single hydraulic piston ensuring a uniform and constant tension of each wire; this is essential to prevent wires from being less tensioned, which would reduce the down-feed speed.
The
arc of movement of the wire stretching pulleys is very large, therefore
the wire installation is very easy and any complicated prestretching
system has been eliminated. The staircase and gangway system allows an easy, quick and safe installation of wires.
Both idle and motorized rollers are easily accessible and protected by a sliding guard.
WIRE INSTALLATION BY 2 OPERATORS ONLY
WIRE INSTALLATION BY 3 OPERATORS ONLY
OPERATOR INTERFACE The large colour touch screen makes programming the machine and controlling the processing phases intuitive and user friendly.
All the work settings and parameters can be controlled and displayed on simple pages with big, clearly visible characters.
The
“statistics” section lets you display and extract all the data required
to manage sawmill and diamond wires, which feature a wisely structured
architecture whether you saw blocks for your own company or for third
parties.
Machine height with wires positioned at the end of cutting620cm
Machine height730-790cm.
If you are considering the purchase of a multi-wire machine for cutting granite blocks and you are interested in receiving an offer on Breton’s “Paragon” write at mail@breton.it. We will promptly provide you with all necessary information and our offer.
We’ll get back to you promptly. Bye-bye Sergio Prior
Good morning, You have less than one month left to visit 50°Marmomacc 2015, the most important fair in the stone-working sector that will be held in Verona, Italy (September 30 to October 3). Let's find out the 10 machines that Breton will exhibit in its stands
You cannot miss the software house area, where you can test the Engineered Stone area, with the innovative Bretonstone Cement® slabs, and new types of Bretonstone® slabs.
We are waiting since Wednesday, September 30 at: Pad. 4 - stand B6/C8 and Pad. 5 - stand C5. We’ll get back to you promptly. Thank you for the attention and best regards. Bye-bye Sergio Prior
