Breton EASYWIRE
MACHINE STRUCTURE AND MECHANISMS
Heavy-duty, heat treated arc-welded steel structure ensuring the required stiffness of the system and cutting precision of the machine.
2 opposite carts sliding vertically on the columns of the support structure for the vertical motion of the cutting wire. The carts support the components for the wire motion and stretching, and are moved vertically by screw/nut screw mechanisms, which are con-trolled by asynchronous motor.
Driving pulley for wire rotation, with a diameter of 1.000 mm. The wire is actuated by an inverter controlled asynchronous motor that manages the wire peripheral speed according to the material to be sawn.
Wire stretching pulley with a diameter of 1.000 mm, which is kept constantly under tension by a pneumatic cylinder.
2 independent driven pulleys with a diameter of 1.000 mm.
2 pulleys with a diameter of 350 mm, whose function is to drive the wire next to the point where it gets into, and comes out from, the block to be sawn.
PULLEY COATING
All pulleys are provided with a wire driving groove, which is coated with special interchangeable wear-resistant elastomer profiles.
SAFETY MEASURES
Sensor connectd to the stretching cylinder that detects promptly any possible breakage of the wire and stops the machine.
DEFLECTION CONTROL
During the sawing operation, the wire deflection is managed by the machine control system, which adjusts the down-feed according to the position of the stretching piston.
RAILS FOR BLOCK-HOLDING TROLLEY
The machine is provided with 8 metres of rails for the sliding of the block-holding trolley in the machine working area.
LUBRICATION
Manually operated lubrication system supplying the lubricant.
MACHINE PROGRAMMING
Control unit for the programming, control of the cutting cycle and management of the working axes.
Software with efficient and user-friendly operator interface.
Colour touch-screen for interaction with the operator.
2 opposite carts sliding vertically on the columns of the support structure for the vertical motion of the cutting wire. The carts support the components for the wire motion and stretching, and are moved vertically by screw/nut screw mechanisms, which are con-trolled by asynchronous motor.
Driving pulley for wire rotation, with a diameter of 1.000 mm. The wire is actuated by an inverter controlled asynchronous motor that manages the wire peripheral speed according to the material to be sawn.
Wire stretching pulley with a diameter of 1.000 mm, which is kept constantly under tension by a pneumatic cylinder.
2 independent driven pulleys with a diameter of 1.000 mm.
2 pulleys with a diameter of 350 mm, whose function is to drive the wire next to the point where it gets into, and comes out from, the block to be sawn.
PULLEY COATING
All pulleys are provided with a wire driving groove, which is coated with special interchangeable wear-resistant elastomer profiles.
SAFETY MEASURES
Sensor connectd to the stretching cylinder that detects promptly any possible breakage of the wire and stops the machine.
DEFLECTION CONTROL
During the sawing operation, the wire deflection is managed by the machine control system, which adjusts the down-feed according to the position of the stretching piston.
RAILS FOR BLOCK-HOLDING TROLLEY
The machine is provided with 8 metres of rails for the sliding of the block-holding trolley in the machine working area.
LUBRICATION
Manually operated lubrication system supplying the lubricant.
MACHINE PROGRAMMING
Control unit for the programming, control of the cutting cycle and management of the working axes.
Software with efficient and user-friendly operator interface.
Colour touch-screen for interaction with the operator.
Click here for more INFO.
By-by
Sergio Prior
hi sir my company granites is a monowiresaw control penal a old display removed new one set is a running contaion are alram sound what is problam please
ReplyDelete