Special high-removal head for granite levelling.
Each tool features an ideal (optimal) operating speed ensuring high removal and a longer service life.
The ideal speed of a diamond wheel on granite is approx. 30m/s.
Nobody has ever produced diamond satellite heads with a satellite rotation speed of 30m/s before.
Breton developed MIRAGE, a head featuring a high tool rotation speed (30m/s equal to approx. 2.800rpm) and a low head rotation speed (about 250rpm).
- Double tool service life with respect to a head with oscillating bricks.
- Double removal capacity with respect to a head with oscillating bricks.
- Outstanding capacity of leveling out the slab surface undulations thanks to the following combined effects:
- High rotation speed of tools.
- Low rotation speed of the head.
- Large volume and high rigidity of the head.
- Head diameter of 510mm.
- Low rotation speed of the head.
- Large volume and high rigidity of the head.
- Head diameter of 510mm.
- Cost of tooling
1,5 times higher than a head with 8 diamond swinging bricks.
- Tool service life
2 times longer than a head with 8 diamond oscillating bricks.
- Removal capacity
2 times higher than a head with 8 diamond oscillating bricks.
- Tool cost per m2
- Tool cost per m2
62% lower than a head with 8 diamond oscillating bricks.
- Hourly output
2 heads Mirage increase the speed of a honing/polishing line by 10-15% while ensuring an excellent leveling quality.
- Free maintenance for at least 4.000 hours.
- Replacement of gaskets, elastic components and oil every 4.000 hours.
- Bearings must be replaced every 25.000 hours.
- Gears last for the entire service life of the head.
- Using a special kit, it can be installed also on Levibreton KG with 19 heads SG8 at work.
- The head requires a 18,5 kW motor.
- The head requires back pressure.
- It is advisable to install 2 heads MIRAGE on the 2nd and 3rd position, respectively.
- The heads MIRAGE can’t be used on resin-treated slabs since they remove too much material.
- It is advisable to install 2 heads MIRAGE on the 2nd and 3rd position, respectively.
- The heads MIRAGE can’t be used on resin-treated slabs since they remove too much material.
For info and price write to mail@breton.it.
Thank you for attention.
Bye-bye
Sergio Prior
0 comments:
Post a Comment