Wednesday 9 November 2016

Multiwire Breton PARAGON family grows

The Breton Paragon range of multiwire saws for cutting granite blocks has been extended to include a 2100 mm cutting width version that can be configured with up to 78 wires. 

In order from the smallest machine, the Paragon range also includes the 600, 800, 1000 and 1600 models.

PARAGON
THE NEW BENCHMARK IN THE MARKET




NOW AVAILABLE ALSO FOR 5.3mm diamond wire




Paragon multi-wire machine with 5.3mm Ø wire

In the picture above, MONDIALGRANIT (counting on 8 operating Breton multi-wire machines) shows its Paragon successfully using the 5,3 mm diamond wire.
 
Breton enriches its product range with Paragon machines, specially conceived to work with 5.3mm wire, for either variable or fixed pitch.
 
5,3 mm wire potential advantages:
• more slabs from a single block
• less electrical power consumption
• less sludge to be removed 

Breton remains at your disposal to provide you with all necessary information to find out about cost savings connected to the use of 5.3mm diamond wire.


INCOMPARABLE AND INNOVATIVE
• Triangle geometry with just five transmissions.
• Diameter of all transmissions of 1.000mm.
• Adjustable wire driving drums.
• Easy access to the machine with practical staircases and gangways.
• Fast and easy wire change and positioning.
• Immediate and intuitive touch screen operator interface for machine management.
• Hydraulic tensioner ensuring a uniform tension among wires.

Mod. PARAGON 600
Mod. PARAGON 800

  TRIANGLE CONFIGURATION

DRUMS / PULLEYS
Paragon five rotating drums, all of which have a diameter of 1.000 mm, guarantee minimum wire fatigue and a very low cooling water consumption.

The rigidity of the structure and the isosceles triangular geometry with wires just 20 metres long guarantees lower wire vibrations while cutting, leading to higher cutting quality and longer service life of the rubber profiles.




THE LOAD-BEARING STRUCTURE
The drums and pulleys are installed inside a rigid, boxed steel structure, which runs along the load-bearing columns, stiffly anchored to the ground and stabilized with steel tie rods that ensure a next-to-nothing deformation for the cutting purpose.
Column deformation while cutting has been checked using finite element mathematical calculations.

MAXIMUM ERGONOMICS
WIRE STRETCHING PULLEYS AND WIRE INSTALLATION 
Wire stretching pulleys, one for each wire, rotate on bearings and are individually driven by a single hydraulic piston ensuring a uniform and constant tension of each wire; this is essential to prevent wires from being less tensioned, which would reduce the down-feed speed.
 
The arc of movement of the wire stretching pulleys is very large, therefore the wire installation is very easy and any complicated prestretching system has been eliminated.
The staircase and gangway system allows an easy, quick and safe installation of wires.

Both idle and motorized rollers are easily accessible and protected by a sliding guard.
WIRE INSTALLATION BY 2 OPERATORS ONLY
 

WIRE INSTALLATION BY 3 OPERATORS ONLY



OPERATOR INTERFACE
The large colour touch screen makes programming the machine and controlling the processing phases intuitive and user friendly.


All the work settings and parameters can be controlled and displayed on simple pages with big, clearly visible characters.


The “statistics” section lets you display and extract all the data required to manage sawmill and diamond wires, which feature a wisely structured architecture whether you saw blocks for your own company or for third parties.
 


Machine height with wires positioned at the end of cutting 620cm

Machine height 730-790cm.

If you are considering the purchase of a multi-wire machine for cutting granite blocks and you are interested in receiving an offer on Breton’s “Paragon” write at mail@breton.it.
We will promptly provide you with all necessary information and our offer
.
 

We’ll get back to you promptly.
Bye-bye
 
Sergio Prior

6 comments:

  1. Great, that machine is looking so good and it is very useful to cut a stone. I really enjoyed your post and so good photos you shared of that machine.
    Jewellery chain making machines

    ReplyDelete
  2. Thanks a lot Mahesh Sharma.
    I hope to write usefull new.
    Best regards,

    Sergio Prior
    Marketing Manager
    Breton SpA

    ReplyDelete
  3. Assessment.com & Sale of Used Machinery, Second Hand Machines for the metalworking machines, plastic processing, food & beverage, wood working & plant .

    used machinery for sale

    ReplyDelete
  4. Thanks for sharing, nice post! Post really provice useful information!

    Công ty vận chuyển hàng nước ngoài FadoExpress hàng đầu chuyên vận chuyển, chuyển phát nhanh siêu tốc đi khắp thế giới, nổi bật là dịch vụ gửi hàng đi mỹ, gửi hàng đi úcgửi hàng đi đài loan và dịch vụ chuyển phát nhanh đi hàn quốc uy tín, giá rẻ

    ReplyDelete
  5. JamunaEngineering is a TOP Plywood Machinery. The raw materials for these plywood machine are sourced from reliable vendors ensuring high durability, tensile strength and resistivity to adverse conditions. Our cutting edge technology facilitates in the fabrication of a world class gamut of Plywood Section including Core Dry Press Plywood Machine, Belt Sander Plywood Machine, Log Debarker Machine, Glue Spreader Machine and others. These are available in different specifications such as length, diameter, thickness etc.

    ReplyDelete