Tuesday 24 April 2018

Multibreton DXL, automatic cross-cut saw for marble and granite strips


MULTIBRETON DXL is an automatic cross-cut saw for marble or granite strips, equipped with up to twelve cutting spindles. 
For each cutting cycle, the machine can saw a single strip or two strips simultaneously - even of different length - into items of the desired size.

The cutting spindles
The cast-iron spindles slide along the bridge on guides in an oil bath, perfectly protected from water. The spindle ositioning is automated, motorized by a screw with lead nuts connected to an electromagnetic clutch and adjusted sequentially for each single spindle. 


Once each spindle has reached the programmed position, it is blocked by a hydraulic mechanism. A pneumatic device can exclude each spindle vertically. 
On request, the machine can be supplied in a special version with simultaneous positioning of all the spindles instead of sequential adjustment of each individual spindle. 

The cutting cycle 

The cutting cycle is fully automated for virtually unattended operating: 

1. the marble or granite strip to be cut moves forward while resting on the feeding belt which slides on the milled bench of the machine, and halts close to the pneumatic stop (if existing). 

2. a movable aligner to bring the strip into square before starting the cut, is housed on the front part of the machine, opposite the spindle-holding beam. 

3. the cut is performed while the spindleholding beam moves orthogonally with respect to the conveyor belt. 

Once the cut is carried out, the saw blades lift before getting back to their starting position, and the strip - cut into tiles - is transferred outside the machine, while a new strip to be cut enters the machine. 
 
Simultaneous cut of two strips
The machine is prearranged to cut also two strips of different length (max. length: 1.500 mm each) through a single cutting cycle, thus optimizing the cuts. 
In this case, during the feeding stage, the first strip halts close to the stop on the machine exit, while the second one is placed at a precalculated distance from the rear edge of the first strip. 

Programming 


A PC with Windows operating system controls the machine. The programming is carried out on a colour “touch-screen” monitor, which is installed on a hanging console. The machine software uses the Windows environment to its full potential through a user-friendly interface. 
The desired cutting size and blade thickness are entered on the “touch-screen” monitor and each spindle automatically reaches the programmed position. 
 
Both the PC and the “touch-screen” monitor are components readily available on the market so as to guarantee, in case of failure, a prompt assistance and spareparts availability throughout the world. 

In order to facilitate some operations to be carried out within the working area (i.e. blade replacement, maintenance, positioning etc.), the machine is supplied with a small portable push-button panel that enables the operator to safely control the movements of the spindles inside the machine working area. 

The electrical, water and lubrication system 

The electrical equipment and water distribution system to each spindle are located on the reverse side of the machine, thus making the maintenance interventions extremely simple and rapid. 
A watertight cabinet houses all the electrical and electronic controls of the machine.

Laser tracer for cut optimization 

Upon request, the machine is equipped with a laser unit which enables to mark off the useful cutting surface through the optical tracing on the strip surface, thus excluding the surface defects. 

The laser tracer is manually pushed by the operator along the roller conveyor on which the strip is placed, and the demarcation of the useful cutting area is set by simply pressing the proper button. 

According to both the orders entered in the system and the surfaces marked off by the tracer, the machine automatically decides where cuts must be carried out, and offl oads the “executed” orders.

For more information and prices, on the Multibreton DXL, contact mail@breton.it.
We’ll get back to you promptly.

Thank you for the attention and best regards.
Bye-bye 

Sergio Prior

22 comments:

  1. Amazing Post with wonderful heavy machines, i like this work. i used a website service for heavy construction equipment work, if you need so visit this - read more

    ReplyDelete
  2. we always follow your posts.its very important this posts for us becouse we share or we send those needs this items. also we produce Automatic concrete block machine which quality is high. if you intresting our Automatic block machine please call us +905533809996, send an email bessmachine61@gmail,comhttps://bessconcreteblockmachine.com/blog/297-automatic-concrete-block-making-machine.html

    ReplyDelete
  3. I always like to read a quality content having accurate information regarding the subject and the same thing I found in this post. Nice work.
    Moreton Bay Concrete cutting Drilling

    ReplyDelete
  4. Thanks a lot Unknow,
    Now I'm writing here: https://www.breton.it/en/stone/blog

    Best regards,
    Sergio Prior

    ReplyDelete
  5. Cut-To-Length Machine Ctlr-2000 Kc The machine is designed to cut exact length and winds fabric onto a core,Works best with thick materials (blankets, rug-like materials, bedspreads).

    ReplyDelete
  6. Very well-written information. It will be useful to everyone who uses it, including me.
    Keep up the good work - you can wait to read more posts.
    xsplit broadcaster crack
    plex media server crack
    final cut pro x crack

    ReplyDelete
  7. With your presentation, you make it appear so simple, but I find this subject to be one that I believe I will never understand.
    It appears to be far too sophisticated and vast for me.
    I'm looking forward to reading your future post,
    I'll make an effort to grasp it!
    vmix pro crack
    teamspeak crack
    alternate password db crack
    pluraleyes crack

    ReplyDelete
  8. I think I have never seen such a beautiful piece of design for a long time. Excellent work!

    dimo videomate crack
    edraw max crack
    opencanvas crack

    ReplyDelete
  9. Your out-of-the-box ideas are always welcomed at the company meetings. Keep inspiring others.
    realplayer crack
    logmein hamachi crack
    beyond compare crack

    ReplyDelete
  10. I guess I am the only one who came here to share my very own experience. Guess what!? I am using my laptop for almost the past 2 years, but I had no idea of solving some basic issues. I do not know how to Download Cracked Pro Softwares But thankfully, I recently visited a website named wahabtech.net
    LogMeIn Hamachi Crack

    ReplyDelete
  11. It was just as enjoyable for me as it was for you.
    I like the drawing and your writing style.
    Please continue to shake to your heart's content.
    Here are the details: uncomfortably quick, but no doubt
    again, as is virtually often the case if you promote this stroll inside.
    tuneup utilities crack keygen
    windows 10 pro crack
    hard disk sentinel pro crack
    mirillis action crack

    ReplyDelete
  12. I am very happy to find this blog. Thanks for sharing it. It's an amazing blog for information.
    driverpack solution 17 torrent
    utorrent hollywood movies 2016
    du meter 7.09 serial key

    ReplyDelete
  13. You are welcome to post. This is an interesting post. I am visiting for the first time. Thanks for sharing such interesting information. Keep sharing.
    iobit uninstaller 6.4 key
    https://CrackerSofts.com/

    ReplyDelete
  14. Hello, Dear If you're looking for window cleaning service so Check out Deep Cleaning

    ReplyDelete
  15. Hello, my name is Mari. Very good content. I appreciate the data you provide. The overall appearance of your website, let alone what it accomplishes, is truly remarkable.
    https://softhound.net/launchbox-premium/

    ReplyDelete
  16. https://windowsactivators.org/internet-download-manager-crack/
    As a group, we like to share good things with good ideas and concepts, and this is a good way to do that.

    ReplyDelete
  17. Thanks for the valuable Content. It will useful for knowledge seekers. Keep sharing your knowledge through this kind of article for natural stone exporter.

    ReplyDelete
  18. Wow, what a fascinating read! The Multibreton DXL Automatic Cross-Cut Saw is truly a game-changer in the stone industry. Its precision and efficiency are unparalleled. I'm particularly impressed by its capabilities as a slit machine, revolutionizing stone cutting. Amazing innovation!

    ReplyDelete